Deepsea Controller Dse4520 Auto Mains (Utility) Failure Control Modules
Product Description
General Features
AUTO START CONTROL MODULES DSE4520 DEEP SEA ORIGINAL are suitable for a wide variety of single gen-set applications.Whilst maintaining functions included within higher end controllers, such as generator or load power monitoring, the DSE45xx range of especially compact controllers provide the user with the ultimate size tofeature ratio.
Monitoring engine speed, oil pressure, coolant temperature, frequency, voltage, current, power and fuel level, the modules will give comprehensive engine and alternator protection. This will be indicated on the largest back-lit LCD icon display in its class via an array of warning, electrical trip andshutdown alarms.
Electronic J1939 (CAN) and nonelectronic (alternator frequency sensing) engine support for diesel, gas and petrol engines all in one variant. With a number of flexible inputs, outputs and protections, the module can be easily adapted to suit a wide range of applications.
Through USB Communication both modules can be easily configured using the DSE Configuration Suite PC Software or can be fully configured through the module's front panel editor.
All DSE products are supported by the DSE global tech nical support team which gives our customersand end users access to 24 hour system help and advice.
KEY FEATURES
• Ultimate size to feature ratio
• Automatically transfers between mains (utility) and generator (DSE4520 only)
• Hours counter provides accurate information for monitoring and maintenance periods
• User-friendly set-up and button layout for ease of use
• Multiple parameters are monitored simultaneously which are clearly displayed on thelargest back-lit icon display inits class
• The module can be configured to suit a wide range of applications
• Uses DSE Configuration Suite PC Software for simplified configuration
• Compatible with a wide range of CAN engines
• Licence-free PC software
• IP65 rating (with optional gasket) offers increased resistance to water ingress
Data Sheet
| AUTO START CONTROL MODULES DSE4520 DEEP SEA ORIGINAL |
| DC SUPPLY |
|
GENERATOR |
|
| CONTINUOUS VOLTAGE RATING |
8 V to 35 V Continuous |
VOLTAGE RANGE |
15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) |
| CRANKING DROPOUTS |
Able to survive 0 V for 50 mS |
FREQUENCY RANGE |
3.5 Hz to 75 Hz |
| MAXIMUM OPERATING CURRENT |
85 mA at 12 V, 96 mA at 24 V |
MAINS (UTILITY) DSE4520 ONLY |
|
| MAXIMUM STANDBY CURRENT |
51 mA at 12 V, 47 mA at 24 V |
VOLTAGE RANGE |
15 V to 415 V AC (Ph to N) 26 V to 719 V AC (Ph to Ph) |
| MAXIMUM SLEEP CURRENT |
35 mA at 12 V, 32 mA at 24 V |
FREQUENCY RANGE |
3.5 Hz to 75 Hz |
| OUTPUTS |
|
DIMENSIONS |
|
| OUTPUT A (FUEL) |
10 A short term, 5 A continuous,at supply voltage |
OVERALL |
140 mm x 113 mm x 43 mm |
| OUTPUT B (START) |
10 A short term, 5 A continuous,at supply voltage |
PANEL CUT-OUT |
118 mm x92 mm |
| AUXILIARY OUTPUTS C,D |
2 A DC at supply voltage |
MAXIMUM PANEL THICKNESS |
8 mm |
Deepsea Controller Dse4520 Auto Mains (Utility) Failure Control Modules
){kind=link}
){kind=link}