Leroy Somer Original automatic voltage regulator/ AVR R448
AVR R448, 50/60Hz.110~600V.
Characteristics
- Shunt power supply: max 150V
- 50/60 Hz - Rated overload current: 10A
- 10s - Electronic protection: (in the event of overload, short-circuit, loss of voltage sensing) this acts to restore the value of the excitation current to 1A after 10 s. The alternator must be stopped (or the power switched off) in order to reset the protection.
- Fuse: F1 on X1, X2. 10A ; slow - 250V - Voltage sensing : 5 VA isolated via transformer • 0-110 V terminals = 95 to 140 V • 0-220 V terminals = 170 to 260 V • 0-380 V terminals = 340 to 520 V for other voltages, a transformer should be used.
- Voltage regulation ± 0.5%
- Normal or rapid response time via jumper ST2 (see below)
- Voltage adjustment via potentiometer P2 or apply a DC voltage of ± 1 V on the terminals of the external potentiometer
- Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. Š 2.5 VA cl1, secondary 1A (optional)
- Quadrature droop adjustment via potentiometer P1
- Max. excitation current adjustment via P5: 4.5 to 10A (see below)
- 50/60 Hz selection via ST3 jumper
- ST11: Knee-point at 65 Hz for Tractelec application and variable speed.
AVR-LS R48 Specially for Leroy Somer alternator/generator(C6/4-AREP excitation with AVR-R438 or AVR-R448),
Technical specification
Input
Voltage 70~140VAC, 3 phase (PMG)
Induction detect 90~480VAC
Output
Voltage Max 125VDC
Current Max 10A
Protection Low speed, over excitation, LAM
Regulation +/- 0.5%
We can supply all kind of AVRs, which is suitable for brushless alternator.
){kind=link}