UK Deepsea Dse702 Manual & Auto Start Control Module

• Conditions of Use: Land Use
• Usage: Common Units
• Output Type: AC Three Phase
• Cooling Method: Water Cooling
• Installation Method: Portable
• Generator Type: Diesel Generator
• Model NO.: DSE702
• Delivery Time: 1day
• Warranty: 1year
• Transport Package: Carton Box
• Specification: original
• Trademark: DEEPSEA
• Origin: UK
• Production Capacity: 100sets/Month

Product Description

DSE702 Manual & Auto Start Control Module

The DSE702 is a compact control module with an hours counter display. The module offers a range of features for single-set applications including low oil pressure, high engine temperature and over speed monitoring.
The controller provides the option of manual or auto start control for the user (must specify type at time of ordering).

OVERALL SIZE
84 mm x 72 mm x 34.9 mm (3.3" x 2.8" x 1.4")
PANEL CUT-OUT SIZE
80 mm x 68 mm (3.1" x 2.7')
MAXIMUM PANEL THICKNESS
8 mm (0.3")
WEIGHT
0.16kg
PRODUCT VARIANTS
0702-00 - 702 Auto Start Control Module (Hours Counter, DSE Logo)
0702-10 - 702 Manual Start Control Module (Hours Counter, DSE Logo)

 
FEATURES
• Manual start
• Engine pre-heat
• Engine monitoring and protection features
• Protected solid state (PSS) outputs
• Front panel mounting
• Tamper proof engine hours counter
• Remote start
• LED indicators
 
BENEFITS
• Hours counter provides accurate information for monitoring maintenance and warranty periods
• Multiple engine parameters are monitored simultaneously
 
OPERATION
 
MANUALMODE
• The module is started using the on-board key/buttons
• The user turns the key to the position
• The engine pre-heat button is then pressed for the required time
• The start button is then pressed to start the engine
• To stop the engine the key needs
 
AUTOMATICMODE
• The key needs to be permanently left in the position
• The module is powered up by the remote start signal
• The pre-heat function is automatically carried out and then the engine is started
• To stop the engine the remote switch is turned to the 'off' position
 
OVERSPEED PROTECTION
The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal operation (57Hz or 68Hz trip respectively).
During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeed is enabled) to allow the engine to reach its optimum running speed.